Replaced the cell (still get error code)

[colucci43]

I have an older model Autoclear Plus SWG that was gving me an error code 94.
I just replaced the cell and the errror code is still registering.
I cannot see any blown fuse to the controller.
I do see a fuse to the transformer box but it is in perfect working order.
Can the controller have an internal fuse built into the CPU board?

I know my salt and pool levels are fine.

any suggestions........

12,000 gal. in ground pebble tech. pool with Hayward pump system.

 

[Pacifica]

It looks like your cpu board could have gone out. What you should try is a Goldline SWG system. I only install this brand of SWG in the field. They are extremely reliable, low maintenance and easy to use. They also produce more chlorine than many other models on the market in comparable cells. Here's a link to one for reference: http://www.pacificapoolsupplies.com...rd/goldline-aqua-rite-generator-power-center/

 

[NWMNMom]

I have an AquaRite/Goldline SWG - the good thing is that all the parts are easy to find/replace if there are problems or as they wear out.