It looks like my pump needs the bearings replaced but the shop wants to keep it for several days and another shop wants 150! I think I'm going to try it myself, and if I can't then i will just buy another motor. I have an AO Smith UST1152, can somebody tell me what bearings I need? Or, if somebody can recommend a place, i would appreciate it. I'm in Freehold, NJ.
What bearings?
- Thread starter jrguzmanr
- Start date
If you have a Motion Industries close they're usually the best place. Jusr take the old ones with you and they'll have what you need.
I've not replaced my motor bearings, so I can't vouch for this. But scroll down to the bottom of the page at the following link and see if that is what you need:
http://www.poolcenter.com/motor_parts.htm
http://www.poolcenter.com/motor_parts.htm
thanks for all the replies, but I've decided to buy a new motor. For 50% more of fixing it I'm getting a new motor.
I'm going to start a new thread with a new question, so if you can redirect your attention I will appreciate it
I'm going to start a new thread with a new question, so if you can redirect your attention I will appreciate it