SWG code 90 "low flow"

[chris_O]

Hi I'm new to these boards

I have a Intex SWG model 8110/8111 that I bought summer 2008. I just increased the size of my pool to 18' diameter that holds appx 8,000 gallons. I keep getting code 90 "low flow" but I have lost my manual and I checked everything the DVD recommends (check that the water "plungers" aren't closed and the hose connections are tight) but I am still getting the same message

If anyone knows how I can fix this or has any suggestions, I'd appreciate it. My pool is starting to get algae and the temps are getting to high 90's so it will only get worse if I can't fix this soon.

Thanks

 

[coloeb]

Might not help but try turning the unit off at the breaker for 2 min. then turning it back on. Maybe it will reset itself and clear the code. your owners manual is linked below.

http://pr-rp.pmra-arla.gc.ca/PR_SOL/pr_web.ve1?p_ukid=5143

First 3 or 4 pages are hard to read but the rest is ok.

 

[JasonLion]

Try cleaning the skimmer basket, filter, and pump strainer baskets.

 

[No P in my ool]

some of the older models had a screen on the input side that gets clogged at times. you have take off the coupling before the flow switch to get to it.