Pin Prick Hole in Vacuum Hose

[qbot]

I've noticed that my vacuum hose has a tiny, almost invisible, hole in it. I can hear it hiss when I connect it to the skimmer (its right at the waterline). I'm still getting a good suction.

Is there a product that anyone would recommend to fix it?

 

[257WbyMag]

Maybe a little epoxy would work. Of course, if this is a sectioned hose, you can just buy a new section.

 

[Bama Rambler]

A dab of silicone sealant shoud work, especially if you can get it into the hole.

 

[JohnT]

If all else fails, cut the end off the hose and install a replacement end.

If you can get silicon to stay in place, try 3M 5200 adhesive/sealant. Be careful with the 5200, because it is heck to get off of anything. It's used on boats to seal screw holes etc..

 

[qbot]

Excellent suggestions. Thanks.

 

[poolgirl22]

polyethylene, reinforced, multi-purpose pressure sensitive tape with a soft and flexible shell and pressure sensitive adhesive. It is generally silver or black in color but many other colors have recently become available. With a standard width of 1+7⁄8 inches (48 mm).


Duct tape.

Works for me. I'm getting 2 extra years out of my hose...