Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 8 of 8

Thread: Esther Williams pool top rail section covers question

  1. Back To Top    #1

    Esther Williams pool top rail section covers question

    Hi Folks,

    I have an older 21ft round Esther Williams pool that we inherited around 3 years ago. There are 2 cover pieces for the top rail at the corners of the deck which I have not been able to figure out how to put in place. Below are a couple of pictures of the right corner. I have the inside (water side) pieces which are not the issue it is these 2 odd shaped pieces I have not been able to figure out. They don't seem to fit well in these corners. Any pointers from Esther Williams pool owners would be greatly appreciated.

    Thanks,

    Mark

    [attachment=0:2zf1wjlh]top_rail1.gif[/attachment:2zf1wjlh]
    Attached Images Attached Images

  2. Back To Top    #2
    NWMNMom's Avatar
    Join Date
    Apr 2007
    Location
    Waaay NW MN
    Posts
    1,582

    Re: Esther Williams pool top rail section covers question

    Is there some sort of end cap/cover that goes on these that is not shown here? Not sure what we are looking at and looking for....
    18x33x52 Buttressfree Seaspray (Wilbar) AGP - 1.5hp Pentair Maxim w/22" Pentair Meteor Sand Filter, Aqua Rite SWG System, Biltmore Walk In Steps - 2/4x20 Solar Panel Setup - Doheny Jet Drive (RIP -Pool Rover Jr) - finally hard plumbed the whole darned thing -
    Beats Driving to the Lake!

  3. Back To Top    #3

    Re: Esther Williams pool top rail section covers question

    Sorry, I did not take a picture with the inside piece. There is piece that wraps around from the inside of the rail (water side) to the top and overlaps the piece shown. The inside piece is the same piece that is used on all the section joins. I will take another picture tomorrow to try to clarify the situation.

    thanks,

    Mark

  4. Back To Top    #4
    Pool-creetin's Avatar
    Join Date
    Mar 2010
    Location
    Michigan
    Posts
    181

    Re: Esther Williams pool top rail section covers question

    Looks like they were removed so they could get the fence post in close to the deck.
    A pic of the caps would be helpfull.
    26x16 rockwood keyhole vynil inground, waterway cartridge filter and swg, variable speed pentair pump, extra large skimmer with 2 main drains in deep end and 2 returns,Rheem raypack 206 natural gas heater, hayward tigershark qc robot. Being installed in late may early june. Woot!

  5. Back To Top    #5

    Re: Esther Williams pool top rail section covers question

    Pool-creetin,

    The pool was given to us used and assembled by yours truly. Just could never figure out those pieces. Here are a few more pics. 3 in this one and 2 in the next post.

    Thanks,

    Mark
    [attachment=2:2vktalb7]1.jpg[/attachment:2vktalb7][attachment=1:2vktalb7]2.jpg[/attachment:2vktalb7][attachment=0:2vktalb7]3.jpg[/attachment:2vktalb7]
    Attached Images Attached Images
    • File Type: jpg 1.jpg (15.5 KB, 96 views)
    • File Type: jpg 2.jpg (14.4 KB, 95 views)
    • File Type: jpg 3.jpg (21.4 KB, 94 views)

  6. Back To Top    #6

    Re: Esther Williams pool top rail section covers question

    2 more pics. First showing the other missing cover area. Second one of the regular covers.[attachment=1:19r522ol]4.jpg[/attachment:19r522ol][attachment=0:19r522ol]5.jpg[/attachment:19r522ol]
    Attached Images Attached Images
    • File Type: jpg 4.jpg (16.8 KB, 94 views)
    • File Type: jpg 5.jpg (14.7 KB, 95 views)

  7. Back To Top    #7
    Pool-creetin's Avatar
    Join Date
    Mar 2010
    Location
    Michigan
    Posts
    181

    Re: Esther Williams pool top rail section covers question

    My caps are diff from yours but the rails and uprights look pretty darn close. Mine slide in together and click in place. I am at a loss as to how those you have go together. Hopefully one of the pros here can help ya!!
    26x16 rockwood keyhole vynil inground, waterway cartridge filter and swg, variable speed pentair pump, extra large skimmer with 2 main drains in deep end and 2 returns,Rheem raypack 206 natural gas heater, hayward tigershark qc robot. Being installed in late may early june. Woot!

  8. Back To Top    #8

    Re: Esther Williams pool top rail section covers question

    Anyone?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •