My pool numbers: advice

Jul 22, 2009
30
New to this.

Here are my numbers with the TFT kit.

FC 0.5
CC 2.0
PH 8.2
CYA 30
TA 300
temp 68 degrees
Test kit was short one bottle so I couldn't do the calcium hardness test.

I shocked the pool at 11:50 am. I now have to leave for a few hours. What next?

A bit concerned about ph and alkalinity and obviously the CC. BTW the water is crystal clear and the pool has no leaves, etc. Walls and floor are clean.
 
1. Let your FC come back down to less than 10ppm.

2. Lower your pH into the mid 7's

3. Shock your pool. Shock it according to the process in Pool School. Shocking occurs over period of time and is not a one time dosage. You are finished shocking when....

your water is crystal clear
you do not have more than .5 CC's
you do not lose more than 1.0FFC overnight

(Please email us [email protected] if we have not already sent you the missing reagent....my apologies)
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.