Way to tape-repair a pipe?

denisbaldwin

0
LifeTime Supporter
Mar 23, 2010
252
I have a pipe on my return side with a very slight leak at a fitting. It's where a 1 1/2" pipe meets another, at the joint. The leak is slight.. I'd say if it lost a cup of water a day, that's a lot.

Is there a way to seal this with some kind of tape? I've tried saturating the pipe in the blue wet PVC cement and it seems to help. but I still see water there occasionally.

I'd hate to have to replace this whole piece of pipe if there's something quick and easy I can do.
 
I've sucessfully repaired small drips on PVC pipe using 2 part epoxies you can buy at Home Depot and such. They make some specifically for wet applications, but I think almost all will work. The trick is to rough up the pipe surrounding the leak with a bit of sandpaper and then press the epoxy into it and around the pipe.
 

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.