Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Back to this pool build Project

  1. Back To Top    #1

    Join Date
    Aug 2018
    Location
    League City/TX
    Posts
    3

    Back to this pool build Project

    I'm looking for recommendation please of Pool sub-contractor( excavator/forming, Re-bar, plumbing, Electrician, start-up guy) in the League City/ Houston metro area. Also companies that you have use for the gunite and Pebble Tec that you would recommend. I'm supposed to be be building our pool this winter and winter is upon us . I will start a new thread with my pool and equipment specs so I can get help with the equipment since it seems to be the most confusing part to me.

    Not sure if you can post the names on here but you could just PM if it not permitted.


    Thank you
    GusGus :)
    Inground pool in Houston TX in design phase

  2. Back To Top    #2

    Join Date
    Jun 2018
    Location
    League City, Texas
    Posts
    127

    Re: Back to this pool build Project

    You can go to Pebbletec’s website to find certified installers but if I remember correctly, the only certified installers in the greater Houston area is Modern Method Gunite. I could be wrong but that’s what I recall. Good luck with your build!

    Edit:

    Here are the two authorized applicators of Pebble Tec in the greater Houston area.

    Authorized Applicators
    My Pool Build 2018—League City, TX: 16,500 gal / IG / 103ft perimeter / 564sf / Pebble Sheen / Depth:3.5’x5.5’x4’ / 7’-spa / 12” raised wall w/3-24” scuppers / tanning ledge / 1,190sf spray deck / Hayward TriStar / Hayward Tigershark / Hayward 2.5hp booster pump / Color LogicLED x 2 / 400K heater / AquaPlus SWG / 525sf cartridge filter / Automation: AquaPlus w/aquaconnect

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •