Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Above ground pool liner

  1. Back To Top    #1

    Join Date
    Jul 2007
    Location
    Kentucky
    Posts
    23

    Above ground pool liner

    I am a first time pool owner and my pool is filled and we are loving it. I do need some help with my liner if there is help. When we installed our liner we were very careful to get out all the wrinkles and did most of them. But as the pool was filling, I notice on one side of the wall that there was some slack in the liner and thought it would eventually stretch out, but what has happen it when the water got to it, it basically wrinkled up against the wall. Its really not noticable because it under water, but I know it there and would like to get them out. Any suggestions?
    Tina
    30' Above Ground/vinyl liner
    1.5 HP Pump/300# sand filter

  2. Back To Top    #2
    Mod Squad JohnT's Avatar
    Join Date
    Apr 2007
    Location
    SW Indiana
    Posts
    8,619
    Do this at your own risk! (but it usually works fine, especially on a new liner) You can grab sections of liner and scoot them using a toilet plunger.
    TFP Moderator
    20K Gallon 20X36 Vinyl Inground
    Hayward S244T Sand Filter with 1HP Whisperflo Pump. Liquidator C-201 and Solar Heat

  3. Back To Top    #3

    Join Date
    Jul 2007
    Location
    Kentucky
    Posts
    23
    Thanks, I'll give that a try.
    Tina
    30' Above Ground/vinyl liner
    1.5 HP Pump/300# sand filter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •