Hi all,
I have a SWG pool however, I drained the pool this winter to start with new water as I was unable to get the chemistry right last year. So, new water and salt cell removed. I want to ask what the recommended procedure for opening the pool is?
should I SLAM before opening? I do not believe I have anything growing in the pool as my highest levels of CCs have been 0.5 this winter.
Should I bring up the chlorine level before adding salt? And to what level? Also how about CYA? Do I bring it up before adding salt or after?
My latest pool check:
pH 7.8 (I have been checking pH religiously as it was my main issue. I bring it down to 7.0 and never let it go above 7.8)
FC 3.5
CC 0.0
TA 55
CH 350
CYA 45
Salt 500
temp 55
any other tips are also appreciated! Thank you
Also: I removed the SWG and turned the heat off this winter. Plaster pool, 1 year old, 6000 gal. Las Vegas, NV
I have a SWG pool however, I drained the pool this winter to start with new water as I was unable to get the chemistry right last year. So, new water and salt cell removed. I want to ask what the recommended procedure for opening the pool is?
should I SLAM before opening? I do not believe I have anything growing in the pool as my highest levels of CCs have been 0.5 this winter.
Should I bring up the chlorine level before adding salt? And to what level? Also how about CYA? Do I bring it up before adding salt or after?
My latest pool check:
pH 7.8 (I have been checking pH religiously as it was my main issue. I bring it down to 7.0 and never let it go above 7.8)
FC 3.5
CC 0.0
TA 55
CH 350
CYA 45
Salt 500
temp 55
any other tips are also appreciated! Thank you
Also: I removed the SWG and turned the heat off this winter. Plaster pool, 1 year old, 6000 gal. Las Vegas, NV