Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Heatpump connection question

  1. Back To Top    #1

    Join Date
    Nov 2017

    Heatpump connection question

    Hello all i just got a heatpump (hayward 140k btu) and want to install it my self (im electrician just not familiar with heatpumps), so the manual only shows electrical connections to the heatpump, in my case 220v. My question is shouldnt there be a connection between my pump and the heatpump for the heatpump to know when the pump is running or not running? My pump is on a 8h timer, what happens after the 8h are over and the heatpump is turned on? I know that when it detects low/no flow it turns off, is this the way it is meant to run?

  2. Back To Top    #2
    ka8yiu's Avatar
    Join Date
    Aug 2016
    SW FL

    Heatpump connection question

    My heat pump, as with probably all or most others, has a flow switch that controls the on/off of the heat pump.
    8K gal IG Fiberglass (San Juan Waikiki I)
    TF-100 Testing Kit
    Hayward Max-Flo VS Pump
    Hayward Star Clear Plus Cartridge Filter
    Pentair Model 320 Automatic Chlorine/Bromine In-Line Feeder

  3. Back To Top    #3
    CJadamec's Avatar
    Join Date
    Apr 2016
    Quaker Hill, CT

    Re: Heatpump connection question

    Turn the heat pump on. Follow the instructions on how to set up the controls. Set the desired temp you want your pool. let your pool pump turn on and off on the timer and walk away. The heat pump will run when ever the pump is running and the water is below the temp you set it for.

    A few thoughts to get the most out of your heat pump. Use a solar cover as much as possible. If you aren't swimming slap that cover on (this is actually true for any heater not just a heat pump). Time your pool pump to only run during the warmest part of the day, for me that about 10am-7pm. Heat pumps work most efficiently when the air is warm. Also running your pump when the air is cold will cause your pool to loose heat faster.

    Enjoy the warm water.
    15x30 AG, Pentair Superflo VS, 19" sand filter, TF-100 test kit
    Aqua Comfort ACT750 heat pump / 6x20 ground mount solar panel / DIY automation

    Photos of 2016 Build, Inside Your Breaker Panel, Free Copy of 2017 NEC code
    TFP is AD Free and is funded solely by member support click here to help

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts