Technically it's in Lake Balboa, signed the contract a week ago and had this design in mind.
Pool Size: 34 x 17 (swimming dimensions aka inner dimensions) Gunite
Pool Depth: 3.5' to 7'
Spa: 7 x 7 18" raised spa U shape, with 2 negative edge spillover, 7 jets
Tanning Ledger: 9x7, umbrella sleeve, should I put 2 Pentair Bubbler/Globrite? the ledge is 18" deep so water will probably be 16" so might be too deep for bubbler?
Steps:I have a 9" step before the tanning ledger, then a step at 30" going across the pool, so can stand on the step and climb into the spa
2 seats on the deep end
Lights: Thinking 3 Globrite on the pool evenly spaced and 1 globrite on the ledge or put led bubblers, 1 in the spa. Or put 2 Pentair regular LED lights in the pool, 1 globrite in the ledger and 1 in the spa.
Coping: Precast Bellecrete
Tile: NPT Artic Laboon 1x1 AT083 for waterline, debating doing all 4 sides of the spa and all 4 top sides as well, glass ribbon? on steps/benches/spa/
Pool finish: Quartzscape (Haven't decided on color yet)
Pool main drain: upgrade to AVSC Channel Drain and matching cover? Do similar to Spa with a round drain? or use the same one?
Equipment:
Pentair:
IntelliFlo VS Pump
420 Clean & Clear Filter
400K BTU MasterTemp
IntelliChlor IC40
EasyTouch8
ScreenLogic2
*Will probably add an intellichem later since it's cheap enough and easy to install.
Big thanks to Tony411LA for answering a lot of my questions and this forum as I searched for countless of hours to get ideas/research/suggestions.
Thoughts? I have no idea where the skimmer will be going, the pool will be behind the house running west to east.
I went ahead and got rid of all the landscaping as I will be installing some sort of pavers/porcelain or similar patio almost all around and just add planters maybe. I should have just dug my own pool LOL.
Pool Size: 34 x 17 (swimming dimensions aka inner dimensions) Gunite
Pool Depth: 3.5' to 7'
Spa: 7 x 7 18" raised spa U shape, with 2 negative edge spillover, 7 jets
Tanning Ledger: 9x7, umbrella sleeve, should I put 2 Pentair Bubbler/Globrite? the ledge is 18" deep so water will probably be 16" so might be too deep for bubbler?
Steps:I have a 9" step before the tanning ledger, then a step at 30" going across the pool, so can stand on the step and climb into the spa
2 seats on the deep end
Lights: Thinking 3 Globrite on the pool evenly spaced and 1 globrite on the ledge or put led bubblers, 1 in the spa. Or put 2 Pentair regular LED lights in the pool, 1 globrite in the ledger and 1 in the spa.
Coping: Precast Bellecrete
Tile: NPT Artic Laboon 1x1 AT083 for waterline, debating doing all 4 sides of the spa and all 4 top sides as well, glass ribbon? on steps/benches/spa/
Pool finish: Quartzscape (Haven't decided on color yet)
Pool main drain: upgrade to AVSC Channel Drain and matching cover? Do similar to Spa with a round drain? or use the same one?
Equipment:
Pentair:
IntelliFlo VS Pump
420 Clean & Clear Filter
400K BTU MasterTemp
IntelliChlor IC40
EasyTouch8
ScreenLogic2
*Will probably add an intellichem later since it's cheap enough and easy to install.
Big thanks to Tony411LA for answering a lot of my questions and this forum as I searched for countless of hours to get ideas/research/suggestions.
Thoughts? I have no idea where the skimmer will be going, the pool will be behind the house running west to east.
I went ahead and got rid of all the landscaping as I will be installing some sort of pavers/porcelain or similar patio almost all around and just add planters maybe. I should have just dug my own pool LOL.