Does anybody know of a way to use an expandable liner safely with a buttress free pool (which uses the straps that go underneath the pool) I have heard of somebody doubling up the straps in the shallow end and not using any in the deep end. Any suggestions?
Expandable liner with a buttress free pool
- Thread starter SunEnterprises
- Start date
- Apr 8, 2007
- 1,616
- Pool Size
- 17450
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
The Wilbar manufactured pools have instructions for using a deep end liner in the buttressfree pools - if I remember correctly, it shows that the straps on the one end are buried in at angles with weighted ends. I'll see if I can find the link to my instructions (mine was a Seaspray by Wilbar)
I would actually have done that if not for a high water table and a concern that a really wet spring would leave that end floating.
http://www.propools.com/products/ABG_Pa ... dliner.pdf
I would actually have done that if not for a high water table and a concern that a really wet spring would leave that end floating.
http://www.propools.com/products/ABG_Pa ... dliner.pdf