Aqua Rite Generating Light

[LonnieB]

My generating light comes on for a few seconds after starting and goes off. I assume that it is not generating.

I tested the chlorine and TC is .3 and the Free C is 0. I am shocking the pool and algae is starting to be a problem.

I took the cell to Leslie's for a test...it is good. I re-installed the cell and the generating light came on for a few seconds and went off.

How can I trouble shoot this?

Lonnie

 

[JasonLion]

Welcome to TFP!

Try setting the percentage to 100% and see if it comes on then.

 

[LonnieB]

Welcome to TFP!

Try setting the percentage to 100% and see if it comes on then.

Thank you.

It is set at 100% and the same - no generating light.

Lonnie

 

[sredish]

what's your salt level at? use a strip to test it

 

[LonnieB]

what's your salt level at? use a strip to test it

Salt is 3200 and CYA is 100.

 

[jeffhask]

They have had a history of some bad circuit boards, ours did the same thing. Had the board replaced under warranty. It's the main board not the display board.