Hey guys, new here but not new to pools. I'm a pretty experienced service tech. However, I moved states for a school and doing some side work. I have been with my old maintenance manager on a motor install however it was with a superflo. With the SP2607X10 It's a complete pump/motor. So all i have to do to install is plumb it and wire it using the existing wires correct? Thanks
Hayward SP2607X10
- Thread starter Tysonpoolguy
- Start date
Veryfy the supply voltage and what voltage the motor is set for. Some are 110 and others 220.
Yeah I'm guessing they won't have a clue so I'm bringing a tester. I believe they already have the 1hp super pump there its just gone bad. I'm having her send me pictures of the old setup. Other than that the install is pretty much just a swap right?
Okay just got the pics of old setup. They had a century centurion 3/4hp that's powered by 230/115v. What kind of problems would that present? Previous plumbing looks pretty shoddy too. Any way to post pics from phone on here?
That 230/115 only means the pump can be run off 230 or 115 depending on how u wire pump. 230 is more efficient on running motors. You should be able to tell the voltage by pulling the breaker which u should have done already so no one can turn it on while u are working on it
Okay so no issue switching from 3/4hp to 1? I know those aren't true ratings just making sure
Appreciate the help seems like the job should be straight forward. Just don't like the fact someone has been there before me working on it.
Thank you all for the help. Extremely easy install only took me an hour. Happy customers too!