Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Strainer Housing

  1. Back To Top    #1

    Join Date
    May 2017
    Location
    Salineville, OH
    Posts
    1

    Strainer Housing

    I replaced the pump strainer housing, but didn't buy a new lid. My old lid won't fit. According to Hayward, there is only one cover (lid). It's SPX1600 D. My old lid is SP 1600-D. The X is not in the part number. Do I need a new one? The old one is too tight.

  2. Back To Top    #2
    Mod Squad Texas Splash's Avatar
    Join Date
    Jun 2014
    Location
    South-Central Texas, Marion/San Antonio
    Posts
    17,340

    Re: Strainer Housing

    Hello and welcome to FP! It looks like most website show the X version. However I did find one advertised as the SP1600D here:
    https://www.poolpartsonline.com/p-32...ies-parts.aspx But when you look at the SKU, it shows the X. Seems like that's the new version being used.
    Pat (a.k.a. Texas Splash) ~ My Pool: Viking Fiberglass; 17,888 Gal; Waterway Supreme 2-sp/2-hp pump; Hayward Ctg filter; TF-100 w/ Speed Stir
    Vital Links: POOL SCHOOL, RECOMMENDED LEVELS, RECOMMENDED CHEMICALS, Poolmath Calculator, SLAM, Chlorine/CYA CHART.
    If you enjoyed your TFP experience, please consider donating to Support TFP!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •