Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 4 of 4

Thread: Jandy Aquapure 1400 s "cell reversing"

  1. Back To Top    #1

    Join Date
    May 2017
    Location
    wichita falls
    Posts
    2

    Jandy Aquapure 1400 s "cell reversing"

    My jandy 1400 is new this season and my cell keeps getting stuck in the cell reversing phase. No codes associated. Tried 2 different flow sensors and still have the same issue. About to fill my pool with dirt and make it a garden.

  2. Back To Top    #2
    Patrick_B's Avatar
    Join Date
    Jun 2011
    Location
    Midland TX
    Posts
    14,999

    Re: Jandy Aquapure 1400 s "cell reversing"

    Welcome to TFP!

    Don't do that Buda! Someone will be along to help you out on this one.
    TFP Moderator
    Essential Links:
    ABC's Of Pool Chemistry, Test Kits, SLAM Your Pool
    28K Gal IG FreeForm, CLI Quartz, Pentair 36"SF & VS Pump, Dolphin M5, Rheem

  3. Back To Top    #3

    Re: Jandy Aquapure 1400 s "cell reversing"

    Do you have a good Power and Flow light?

    Is the "Service" or "Add Salt" light on?

    What are your %, salinity and temperature?

    Try turning off the power for 1 minute and then restore power to see if you get "Cell On".

    The AquaPure has a 3 hour cycle time. The percentage setting will control how much the cell runs during the cycle.

    For example, at 50%, the box will say "Cell On" for 1.5 hours then "Cell Resting" for 1.5 hours. Then, there is a two minute off time, then the box will say Cell Reversing for 1.5 hours, then Cell Resting for 1.5 hours etc.
    Support the site

    Trouble Free Pool is a free resource. The people who answer questions are volunteers. If you find the site to be a good resource, please consider making a donation to help support the site. Thanks.

  4. Back To Top    #4

    Join Date
    May 2017
    Location
    wichita falls
    Posts
    2

    Re: Jandy Aquapure 1400 s "cell reversing"

    No service light, no add salt light, salt 3.6 (reads high based on the pool store reading), temp 81F. Good power and good flow. I have yet to see the resting light come on. I'll check it throughout a 3 hour cycle and I'll report back.
    Last edited by A10Buda; 05-15-2017 at 11:20 PM. Reason: Typo

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •