Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: VSP Comm Error - Hayward EcoStar & Pro Logic

  1. Back To Top    #1

    Join Date
    May 2017

    Question VSP Comm Error - Hayward EcoStar & Pro Logic

    I cannot get my Hayward Pro Logic board to communicate with my Hayward Ecostar VSP pump. The pump says "Comm Bus Offline" and the Pro Logic says "VSP Comm Error". I followed the instructions to the T and can't get it to work. I even tried running different wires between the 7/2 & 8/3. The Filter Bus Address is set to "Filter". Any suggestions would be greatly appreciated as I'm out of ideas!



  2. Back To Top    #2
    Mod Squad pooldv's Avatar
    Join Date
    Aug 2012
    DFW, TX

    Re: VSP Comm Error - Hayward EcoStar & Pro Logic

    Welcome to TFP!

    My only suggestion here is to call Hayward for some help on this one.
    TFP Moderator
    If TFP helped you or saved you money - Become a TFP Supporter! <--Click here
    2012 build and pics, 20k gal gunite, black onyx pebblesheen, OK flagstone, IntellifoVS, cart filter w/Pleatco, IC40 SWG, Solartouch, 5 12'x4' solar panels, HP50HA heat pump, 8mil solar cover, borates, TF-100 test kit, SONOS, Doheny's Discovery Robot, hot tub on bleach

  3. Back To Top    #3

    Join Date
    Apr 2009
    Burlington, ON, Canada

    Re: VSP Comm Error - Hayward EcoStar & Pro Logic

    Don't know if these will help you or not. I know the Tri-Star technical guide helped me set my Tri-Star VS up in relay mode to work with my Jandy PDA controls. Good Luck. Page 10 shows how to hook up to Pro Logic. You must have software version 2.65 or higher.
    16x28 Roman, 55000 litres, salt water, Zodiac Duoclear 130 (mineral cartridge removed!!!), inground, vinyl liner
    Hayward Tri-star VS900 (1.85 HP) pump, Hayward C3030 cartridge filter
    Nine Techno Solis 4x10 solar panels, Jandy LX 250 natural gas heater
    Jandy Aqualink PDA with Sub Panel Power Centre

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts