Become a TFP Supporter Pool Math Forum Rules Pool School
Page 1 of 3 123 LastLast
Results 1 to 20 of 42

Thread: New to TFP and converting from Baquacil

  1. Back To Top    #1

    Join Date
    May 2017
    Location
    Petersburg IL
    Posts
    34

    New to TFP and converting from Baquacil

    Newbie to this site and want to say thanks to everyone for sharing your knowledge. Okay, I thought that by having the pool store test my water every 7 to 10 days and following all their recommendations everything would be great and it was until last year. Have been using baquacil and last year had it all -- pink slime, green water, green algae appeared overnight covering half the pool and then black spots the size of quarters and nickels all over the bottom of the pool. Pool store said it was black algae which I now question after reading your site since I have vinyl. Could one of the three algacides they had me use cause this? We tried several times to scrub the spots but they did not budge. Winter cover still on with 40 degree nights. Have new test kit, new media for filter, stockpile of bleach and have read your instructions for conversion at least 25 times preparing for the challenge ahead. I am curious since most members deal with raising the PH. My PH levels consistently showed 8+ and I have been using a product called PH Down. Am I correct that I will need muriatic acid to correct high PH?

    Thanks again for all your knowledge and patience as I know I will be asking a lot of questions in the near future. I am looking forward to not driving 25 miles for water testing and $$$ worth of chemicals especially since they caused nothing by headaches all last swim season.
    12,500 AG, Vinyl, Sandmaster Hayward SM1915SHG, Hayward Vari-Flo SP0714X, Pump Hayward Power-Flo XL SP1580X15FDI. I.nstall 5/2014, first fill hauled city water maintain on well as possible. Test kit Taylor K-2006

  2. Back To Top    #2
    JoyfulNoise's Avatar
    Join Date
    May 2015
    Location
    Tucson, AZ
    Posts
    14,077

    Re: New to TFP and converting from Baquacil

    Welcome to TFP

    Please re-read the Baquacil-to-chlorine conversion instructions another 25 times We have found over the years that many just don't get it and they cut corners or leave out steps - it is vitally important that the process be follow to the letter!

    Two questions -

    1. What are your current Baquacil sanitizer (PHMB) levels?

    2. Did you ever use the Baquacil CDX product in your pool?

    For pH adjustments, you'll need muriatic acid...dry acid is no bueno (adds sulfates to the water and our goal here is to stop adding stuff that is unnecessary). Please post a set of current water test results, right now all we care about are -

    pH
    TA
    CH (this one is just for fun so you can practice the test)

    Also, please measure your fill water pH, TA and CH.

    And here's the final instruction - DO NOT ADD ANY CHEMICAL WITH CYANURIC ACID (CYA) IN IT! That includes dichlor shock powder, trichlor pucks, any of the Clorox pool care products, conditioner/stabilizer, etc, etc. The only chemicals you will be adding are laundry bleach (or higher strength liquid chlorine) and muriatic acid, that's it!
    Matt
    16k IG PebbleTec pool, 650gal spa, spillway and waterfall, 3HP IntelliFlo VS / 1.5HP WhisperFlo, Pentair QuadDE-100 filter, IC40 SWCG, MasterTemp 400k BTU/hr NG heater, KreepyKrauly suction-side cleaner Dolphin S300i robot, EasyTouch controls, city water, K-1001, K-2006 and K-1766 test kits, Mannitol test for borates

  3. Back To Top    #3
    Mod Squad Texas Splash's Avatar
    Join Date
    Jun 2014
    Location
    South-Central Texas, Marion/San Antonio
    Posts
    17,323

    Re: New to TFP and converting from Baquacil

    Hello and welcome to TFP! Matt's questions above are key to your transition. Once we have a bit more info to go on, we'll make sure you have some good guidance to move forward. Nice to have you with us.
    Pat (a.k.a. Texas Splash) ~ My Pool: Viking Fiberglass; 17,888 Gal; Waterway Supreme 2-sp/2-hp pump; Hayward Ctg filter; TF-100 w/ Speed Stir
    Vital Links: POOL SCHOOL, RECOMMENDED LEVELS, RECOMMENDED CHEMICALS, Poolmath Calculator, SLAM, Chlorine/CYA CHART.
    If you enjoyed your TFP experience, please consider donating to Support TFP!

  4. Back To Top    #4
    Mod Squad JohnT's Avatar
    Join Date
    Apr 2007
    Location
    SW Indiana
    Posts
    9,323

    Re: New to TFP and converting from Baquacil

    I'm going to move this thread to the Baquacil Forum
    TFP Moderator
    20K Gallon 20X36 Vinyl Inground
    Hayward S244T Sand Filter with 1HP Whisperflo Pump. Liquidator C-201 and Solar Heat

  5. Back To Top    #5

    Join Date
    May 2017
    Location
    Petersburg IL
    Posts
    34

    Re: New to TFP and converting from Baquacil

    Thanks for the warm welcome. While waiting for temps to improve I will study the conversion instructions at least another 25 times along with how to use the test kit for PH, TA & CH.
    Will be in touch when pool is open and tests complete.
    12,500 AG, Vinyl, Sandmaster Hayward SM1915SHG, Hayward Vari-Flo SP0714X, Pump Hayward Power-Flo XL SP1580X15FDI. I.nstall 5/2014, first fill hauled city water maintain on well as possible. Test kit Taylor K-2006

  6. Back To Top    #6
    JoyfulNoise's Avatar
    Join Date
    May 2015
    Location
    Tucson, AZ
    Posts
    14,077

    Re: New to TFP and converting from Baquacil

    Quote Originally Posted by Zinnia View Post
    Thanks for the warm welcome. While waiting for temps to improve I will study the conversion instructions at least another 25 times along with how to use the test kit for PH, TA & CH.
    Will be in touch when pool is open and tests complete.
    Practice the test kit on your tap water....since it's a well, you don't need to do the chlorine or CYA tests, just pH, TA and CH.

    And please, for your own sanity, stay out of the pool store! They will try to "help" you with the conversion and they simply do not know what they are talking about. We've had more screwed up Baq conversions because folks went to the pool store first and followed their typical advice of dumping pounds of dichlor shock into the pool. Once stabilizer (CYA) gets in the water, the conversion is nearly impossible to do and you basically have to dump the pool water.

    Just repeat this mantra -

    The pool $tore is my enemy, the pool $tore is my enemy, ......
    Matt
    16k IG PebbleTec pool, 650gal spa, spillway and waterfall, 3HP IntelliFlo VS / 1.5HP WhisperFlo, Pentair QuadDE-100 filter, IC40 SWCG, MasterTemp 400k BTU/hr NG heater, KreepyKrauly suction-side cleaner Dolphin S300i robot, EasyTouch controls, city water, K-1001, K-2006 and K-1766 test kits, Mannitol test for borates

  7. Back To Top    #7
    Mod Squad kimkats's Avatar
    Join Date
    Jul 2012
    Location
    Tallahassee, FL
    Posts
    33,884

    Re: New to TFP and converting from Baquacil

    Quote Originally Posted by JoyfulNoise View Post

    2. Did you ever use the Baquacil CDX product in your pool?
    Do you know if you use any of this product?

    Kim
    TFP Moderator 33x52 round AG 25,600 gals Sand Filter 1.5hp Pump - 2 Speed, SLAM, Pool School, Recommended Levels, Recommended Chemicals, Pool Math, Chlorine/CYA Chart, TF-100 Test Kit

  8. Back To Top    #8

    Join Date
    May 2017
    Location
    Petersburg IL
    Posts
    34

    Re: New to TFP and converting from Baquacil

    Have never used a CDX product
    12,500 AG, Vinyl, Sandmaster Hayward SM1915SHG, Hayward Vari-Flo SP0714X, Pump Hayward Power-Flo XL SP1580X15FDI. I.nstall 5/2014, first fill hauled city water maintain on well as possible. Test kit Taylor K-2006

  9. Back To Top    #9
    JoyfulNoise's Avatar
    Join Date
    May 2015
    Location
    Tucson, AZ
    Posts
    14,077

    Re: New to TFP and converting from Baquacil

    Ok. Good.

    I just want to make this point up front so that you are prepared - the conversion process can and will use A LOT of bleach. You will be buying it several gallons at a time and probably go through 30 or more gallons of bleach when all is said and done. If you have a Costco or Walmart that sells it in 3-packs, that is your best bet. The conversion process, at least initially, takes a lot of focused attention and baby-sitting the pool and filter. It is best if you can find a time in your schedule where you can spend a couple of days on this (like a long weekend with Fri and Mon off) without interruption. I can't emphasize this enough as people are often unprepared for the extent of work this conversion takes. Planning ahead and getting all of your resources lined up, as well as getting the time off in your schedule, will go a long way in making the process easier.

    Sorry if it sounds scary or like a pain, I'm just trying to give you a realistic outlook.


    Matt
    16k IG PebbleTec pool, 650gal spa, spillway and waterfall, 3HP IntelliFlo VS / 1.5HP WhisperFlo, Pentair QuadDE-100 filter, IC40 SWCG, MasterTemp 400k BTU/hr NG heater, KreepyKrauly suction-side cleaner Dolphin S300i robot, EasyTouch controls, city water, K-1001, K-2006 and K-1766 test kits, Mannitol test for borates

  10. Back To Top    #10
    Mod Squad kimkats's Avatar
    Join Date
    Jul 2012
    Location
    Tallahassee, FL
    Posts
    33,884

    Re: New to TFP and converting from Baquacil

    Matt that is a good thing to tell them! That way they will be ready! Nice job!

    It will pay off in the end though! SO much easier and cheaper when it is all said and done!

    Kim
    TFP Moderator 33x52 round AG 25,600 gals Sand Filter 1.5hp Pump - 2 Speed, SLAM, Pool School, Recommended Levels, Recommended Chemicals, Pool Math, Chlorine/CYA Chart, TF-100 Test Kit

  11. Back To Top    #11

    Join Date
    May 2017
    Location
    Petersburg IL
    Posts
    34

    Re: New to TFP and converting from Baquacil

    Winter cover off. Have very defined black ring in bottom and center of pool. Good news is does seem to rub off when I ran vac head over it. Waiting on water delivery. Armed with 31 gallons of bleach, 2 gal muriatic acid, 24# baking soda and the day off to test every hour. Tested "winter" water in pool: PH +8, TA 125, CA 250. Will take a sample of delivered water when it arrives and post those results also. Wish me luck I think I'll need it.
    12,500 AG, Vinyl, Sandmaster Hayward SM1915SHG, Hayward Vari-Flo SP0714X, Pump Hayward Power-Flo XL SP1580X15FDI. I.nstall 5/2014, first fill hauled city water maintain on well as possible. Test kit Taylor K-2006

  12. Back To Top    #12

    Join Date
    May 2017
    Location
    Petersburg IL
    Posts
    34

    Re: New to TFP and converting from Baquacil

    Okay, while adding water to the pool discovered entire bottom of pool covered in brown fuzzy yuck. Vacuumed out first load of water to waste. Tested hauled in water: PH 7.4, TA 250 & CA 125. Filled pool and tested water again: PH 7.5, TA 175, CA 175. So according to pool math I should add 12 oz muriatic acid to reach a target of 7.3 on PH.
    12,500 AG, Vinyl, Sandmaster Hayward SM1915SHG, Hayward Vari-Flo SP0714X, Pump Hayward Power-Flo XL SP1580X15FDI. I.nstall 5/2014, first fill hauled city water maintain on well as possible. Test kit Taylor K-2006

  13. Back To Top    #13
    JoyfulNoise's Avatar
    Join Date
    May 2015
    Location
    Tucson, AZ
    Posts
    14,077

    Re: New to TFP and converting from Baquacil

    Holy COW! That trucked water has a ton of alkalinity in it....it's not a problem for the conversion but your pH is going to rise quickly given that amount of alkalinity.

    I wouldn't focus too much on the muck in the pool. The conversion process has you adding chlorine up to 15ppm FC with zero CYA - that is super harsh and will kill EVERYTHING in the pool.
    Matt
    16k IG PebbleTec pool, 650gal spa, spillway and waterfall, 3HP IntelliFlo VS / 1.5HP WhisperFlo, Pentair QuadDE-100 filter, IC40 SWCG, MasterTemp 400k BTU/hr NG heater, KreepyKrauly suction-side cleaner Dolphin S300i robot, EasyTouch controls, city water, K-1001, K-2006 and K-1766 test kits, Mannitol test for borates

  14. Back To Top    #14

    Join Date
    May 2017
    Location
    Petersburg IL
    Posts
    34

    Re: New to TFP and converting from Baquacil

    Ya, our water is rough around here. How long after adding acid do I wait to retest PH?
    12,500 AG, Vinyl, Sandmaster Hayward SM1915SHG, Hayward Vari-Flo SP0714X, Pump Hayward Power-Flo XL SP1580X15FDI. I.nstall 5/2014, first fill hauled city water maintain on well as possible. Test kit Taylor K-2006

  15. Back To Top    #15
    JoyfulNoise's Avatar
    Join Date
    May 2015
    Location
    Tucson, AZ
    Posts
    14,077

    Re: New to TFP and converting from Baquacil

    If the pumps are running and circulating, then give it a good brush to mix and measure in about 15-20 mins later
    Matt
    16k IG PebbleTec pool, 650gal spa, spillway and waterfall, 3HP IntelliFlo VS / 1.5HP WhisperFlo, Pentair QuadDE-100 filter, IC40 SWCG, MasterTemp 400k BTU/hr NG heater, KreepyKrauly suction-side cleaner Dolphin S300i robot, EasyTouch controls, city water, K-1001, K-2006 and K-1766 test kits, Mannitol test for borates

  16. Back To Top    #16

    Join Date
    May 2017
    Location
    Petersburg IL
    Posts
    34

    Re: New to TFP and converting from Baquacil

    On day three of conversion. Water has never looked so good. First two days tested every hour and added according to pool math to keep FC at 15. (28 jugs of bleach). Backwashed a couple of times, brushed and vacuumed. Tested early AM and 1 PM today, will now wait until sun is off pool to test. Worried I might run out of testing reagent I have tested so often. Waiting for 1 ppm loss overnight to change media. I think I'll make it!!!!!!!
    12,500 AG, Vinyl, Sandmaster Hayward SM1915SHG, Hayward Vari-Flo SP0714X, Pump Hayward Power-Flo XL SP1580X15FDI. I.nstall 5/2014, first fill hauled city water maintain on well as possible. Test kit Taylor K-2006

  17. Back To Top    #17
    JoyfulNoise's Avatar
    Join Date
    May 2015
    Location
    Tucson, AZ
    Posts
    14,077

    Re: New to TFP and converting from Baquacil

    Which kit did you order?

    If you need refills, TFTestKits.net has all the refills and can usually get stuff shipped out fast. They are happy to help out.

    Sounds like it's going well for you. Definitely get your overnight loss check in tonight to see where you're at. Maintain your FC as best you can. If you need to, use a 5mL water sample and then each drop of titrant is 1ppm FC. The test is not as accurate when using such a low sample volume size but it can help conserve reagents while you're waiting for refills.


    Matt
    16k IG PebbleTec pool, 650gal spa, spillway and waterfall, 3HP IntelliFlo VS / 1.5HP WhisperFlo, Pentair QuadDE-100 filter, IC40 SWCG, MasterTemp 400k BTU/hr NG heater, KreepyKrauly suction-side cleaner Dolphin S300i robot, EasyTouch controls, city water, K-1001, K-2006 and K-1766 test kits, Mannitol test for borates

  18. Back To Top    #18

    Join Date
    May 2017
    Location
    Petersburg IL
    Posts
    34

    Re: New to TFP and converting from Baquacil

    Thanks for the information. Have ordered refills should be here in two days. Hoping overnight loss is minimal. Going to make a run for more bleach too.
    12,500 AG, Vinyl, Sandmaster Hayward SM1915SHG, Hayward Vari-Flo SP0714X, Pump Hayward Power-Flo XL SP1580X15FDI. I.nstall 5/2014, first fill hauled city water maintain on well as possible. Test kit Taylor K-2006

  19. Back To Top    #19

    Join Date
    May 2017
    Location
    Petersburg IL
    Posts
    34

    Re: New to TFP and converting from Baquacil

    Had to return to work today so will not be able to test every hour. Today if fourth day of conversion FC this AM was 11. Will this lengthen the time the conversion will take? Will be able to test early AM, noon, 4 pm till dark.
    12,500 AG, Vinyl, Sandmaster Hayward SM1915SHG, Hayward Vari-Flo SP0714X, Pump Hayward Power-Flo XL SP1580X15FDI. I.nstall 5/2014, first fill hauled city water maintain on well as possible. Test kit Taylor K-2006

  20. Back To Top    #20
    JoyfulNoise's Avatar
    Join Date
    May 2015
    Location
    Tucson, AZ
    Posts
    14,077

    Re: New to TFP and converting from Baquacil

    Try to figure out what your FC consumption looks like and then dose a few extra ppm to help. Sunlight loss is going to be the biggest killer so there's really not much you can do about it. Just try to work around your schedule and keep your FC as elevated as possible.


    Matt
    16k IG PebbleTec pool, 650gal spa, spillway and waterfall, 3HP IntelliFlo VS / 1.5HP WhisperFlo, Pentair QuadDE-100 filter, IC40 SWCG, MasterTemp 400k BTU/hr NG heater, KreepyKrauly suction-side cleaner Dolphin S300i robot, EasyTouch controls, city water, K-1001, K-2006 and K-1766 test kits, Mannitol test for borates

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •