Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Add what temperature do I have to start paying attention to Cl

  1. Back To Top    #1

    Join Date
    May 2012
    Location
    Toronto, ON
    Posts
    472

    Add what temperature do I have to start paying attention to Cl

    My pool was just uncovered this week and it was shocked as part of the opening process. The FC that I measured yesterday was 11. The pool has pretty much cleared up but the temp is only 50F and the weather will be unseasonably cold for the next week or two so it won't be warming up much, if at all. My SWCG won't operate at these temps, but that doesn't matter so much since the water is so cold. Do I have to even bother monitoring the Cl for the next week or so? And at what temperature will the the SWCG start operating?
    Vinyl 18'x36' in-ground 100,000 L, Jandy Aquapure 1400 SWCG, Jandy Lite2 heater, StaRite System3 filter, Evac tube solar heating panels

  2. Back To Top    #2
    Mod Squad woodyp's Avatar
    Join Date
    Apr 2010
    Location
    East Texas
    Posts
    10,158

    Re: Add what temperature do I have to start paying attention to Cl

    SWG should kick in around 55 to 60 degrees. Maimtain your FC level to match your CYA and monitor.
    16x32x52" Steel Cornelius Miramar AGP Vinyl liner 13,100 gal. Buried 2 ft.
    2 Speed Hayward Power-Flo Matrix 85 g.p.m. 22" 250lb. sand filter hard plumbed
    Pool Rover Jr., Pool Blaster Max, Diver Dave TF100 Test Kit/Speed Stir
    Margaritaville Frozen Concoction Maker, Liqour Chiller, & Drink Mixer & Party Tub----Collect 'um all!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •