I have a Hayward blue essence salt chlorinator that is just over a year old. Today I found it with no display and no light. Seems it's totally without power. I tested the breaker and the wires coming attached to the board and it's good. The fuse is good but there is no power at the fuse that I can tell. Is there someway to narrow down the culprit? Any help appreciated.
Hayward blue essence trouble
- Thread starter Michaelg
- Start date
Welcome to TFP!
Turn off the SWG and remove the board for the display and reinstall it. Sometimes this helps when there is a bad connection.
Turn off the SWG and remove the board for the display and reinstall it. Sometimes this helps when there is a bad connection.
I believe they have 3 year warranties? Certainly more than a year I believe. I had my friend install that model about a year ago.