Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 6 of 6

Thread: Can't find Oring pump lid

  1. Back To Top    #1

    Can't find Oring pump lid

    I have a hayward northstar pump from ~ 2003 ( can't say age for certain ) . Everywhere I go the orings for pump lids are too big. When searching online most don't have measurements and the ones that do are at least an inch in diameter too large. Anyone know a place I could find this ? As per the image attached to this post I believe it needs about a 7 1/4-3/8 diameter. Thanks in advance for any advice !!
    Attached Images Attached Images

  2. Back To Top    #2
    Mod Squad pooldv's Avatar
    Join Date
    Aug 2012
    Location
    DFW, TX
    Posts
    24,974

    Re: Can't find Oring pump lid

    Give Inyo Pools a call, they'll help you figure it out.

    Also, you might have received a coupon for Inyo when you donated to TFP. Thanks for that, by the way!
    TFP Moderator
    If TFP helped you or saved you money - Become a TFP Supporter! <--Click here
    2012 build and pics, 20k gal gunite, black onyx pebblesheen, OK flagstone, IntellifoVS, cart filter w/Pleatco, IC40 SWG, Solartouch, 5 12'x4' solar panels, HP50HA heat pump, 8mil solar cover, borates, TF-100 test kit, SONOS, Doheny's Discovery Robot, hot tub on bleach

  3. Back To Top    #3

    Join Date
    Nov 2014
    Location
    United Kingdom
    Posts
    226

    Re: Can't find Oring pump lid

    You could also search online for "O" rings after measuring the thickness and recess


    10,000 gallons inground Leisure fibreglass pool, Hayward powerline pump, Quality120 glass media filter, 27kw output air source heat pump and thermal cover.
    Retractable cover with Polycarbonate roof and glass side for all year round use. K-2006C test kit and Speed stir

  4. Back To Top    #4

    In the Industry

    duraleigh's Avatar
    Join Date
    Apr 2007
    Location
    Sebring, Florida
    Posts
    30,954

    Re: Can't find Oring pump lid

    Call INYO. They have demonstrated an ability to find parts for TFP members that is very helpful. There is no "cut" for TFP, we just think they do a pretty good job.
    Dave S.
    42k vinyl and concrete pool, 1.5hp pump, 140gpm filter
    TFTestkits , PoolMath , Pool School

  5. Back To Top    #5

    Re: Can't find Oring pump lid

    Are you kidding this site is the best... Will donate again as well. Want to keep you guys around

  6. Back To Top    #6
    Mod Squad pooldv's Avatar
    Join Date
    Aug 2012
    Location
    DFW, TX
    Posts
    24,974

    Re: Can't find Oring pump lid

    Always good to hear! Thanks!
    TFP Moderator
    If TFP helped you or saved you money - Become a TFP Supporter! <--Click here
    2012 build and pics, 20k gal gunite, black onyx pebblesheen, OK flagstone, IntellifoVS, cart filter w/Pleatco, IC40 SWG, Solartouch, 5 12'x4' solar panels, HP50HA heat pump, 8mil solar cover, borates, TF-100 test kit, SONOS, Doheny's Discovery Robot, hot tub on bleach

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •