Pentair wireless controller

[wbrewski]

Guys, I have a controller it connects to my easytouch ok, but after a few minutes it goes to

this panel is for easytouch
it is connected to a PL4/PSL4

And I can not reset it no matter what buttons I push., I have to take the batteries out to reset it. Is this a comm loss? or what?

 

[Patrick_B]

I am not sure Walt. Maybe the addresses are mis-matched? I only had so ething like that once, and that's what it was.

 

[JoelFitz]

The Ez-Touch and the PS4-PSL4 take two different wireless controllers. Is the front face sticker white or gray? Part # for the Ez-Touch is 520547 and the PS4-PSL4 is 522464.

 

[wbrewski]

It is white , wili check the other #

 

[JoelFitz]

White is for the Ez-touch unless something changed recently. You can find the model number in the battery compartment.

 

[wbrewski]

The Ez-Touch and the PS4-PSL4 take two different wireless controllers. Is the front face sticker white or gray? Part # for the Ez-Touch is 520547 and the PS4-PSL4 is 522464.

Guys, I do not know if this is ok , I am just a home owner.
Well any ways I am selling on E-bay a PCB pentair # 522546 and a easytouch controller Pentair # 522546 .

 

[wbrewski]

The Ez-Touch and the PS4-PSL4 take two different wireless controllers. Is the front face sticker white or gray? Part # for the Ez-Touch is 520547 and the PS4-PSL4 is 522464.

Does anyone know if the antennas are the same?