Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 4 of 4

Thread: Aqualogic (PS4) AUX1 no longer working in auto.

  1. Back To Top    #1
    maxepr1's Avatar
    Join Date
    Mar 2011

    Aqualogic (PS4) AUX1 no longer working in auto.

    Noticed the other day the pool floor was dirty. After a few days of watching, realized that my Polaris (which is on AUX1 relay) wasn't turning on. But manual works fine. Checked the times to make sure everything was on the correct time, it was. Went into the menu to make sure it was still on the timer in the configuration page. Everything seems to be correct. Searches didn't come up with anything like what I have got.
    Has anyone out there heard or seen this?
    40'x19' IG Diamond Brite 29K 4' Waterfall/Dive Rock FNS60 DE Inteliflo VS 2hp Whisperflo pumps Aqualogic(P4) SWG TF100 Tester

    Pool School, Pool Calculator,TFTestKits,

  2. Back To Top    #2

    Join Date
    Apr 2016

    Re: Aqualogic (PS4) AUX1 no longer working in auto.

    Hi Max,

    If I had to guess, sounds like one of the signal relays/switches is burned out. Do you have other outputs on your controller that you can connect to that relay?

    Since it is working in manual mode, I'm guessing the relay itself is fine. But there might be some problem with the signal coming to the relay. And since you haven't changed anything with the software, I'd guess it might be hardware issue.

    Good luck!

    Mo - 21K gal, IG plaster, dual Pentair SuperfloXF pumps, 72 sqft DE filter, cartridge filter for the spa, dual Waterco multi-cyclone prefilters, Dual Circupool SWGs, Polaris booster and cleaner, TBD custom controller.

  3. Back To Top    #3
    Mod Squad Jimrahbe's Avatar
    Join Date
    Jul 2014
    Bedford, TX

    Re: Aqualogic (PS4) AUX1 no longer working in auto.


    Unlike Mo, I believe that if pushing the manual button works, then the only reason that the Aux1 would not turn on would be a programming issue... So, between the two of us, we've got a 100% chance of being right...

    I suggest that you clear out all the programing for Aux1 and then set it up again..

    My guess is that will fix your issue.

    Thanks for posting,

    Jim R.
    Finished in 2015 - 17K Gal, IG, 20' x 25' Almost Rectangular Pool, Pebble finish, three rockport water falls. Pentair Equipment: EasyTouch 4, IC40 SWG, 3 HP VS Pump, CCP520 Cartridge Filter.
    TF100 with SpeedStir and SampleSizer, ColorQ Pro 7, Dolphin Premier Robot Cleaner, added Screen Logic 2, added small 3 person Caldera Spa.

  4. Back To Top    #4

    Re: Aqualogic (PS4) AUX1 no longer working in auto.

    Sounds like the system is in Service mode.
    Support the site

    Trouble Free Pool is a free resource. The people who answer questions are volunteers. If you find the site to be a good resource, please consider making a donation to help support the site. Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts