Got my test kit and results! Now what?
- Thread starter Mkla216
- Start date
Picture will be coming soon! It's been a little rainy here so I've been waiting to vacuum. However, I now have to fill the entire flask up until the black dot to measure my CYA is no longer visible. So my CYA is a little lower than 30. Should I do something?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
How is the water looking now? Are you still doing the SLAM? Since you have some CYA you can let it ride until the SLAM is done.
Kim
Kim
The pool looks amazing. There's still a tiny bit of sand in the bottom but I plan to vacuum for the second time today and hopefully get it out. Should I change how much bleach is going into the pool because the cya dropped?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Jun 22, 2014
- 47,797
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Glad to hear the water is looking good. 
Yes, you should adjust FC (bleach dosages) based on your current CYA. So if your CYA has dropped, take a look at the Chlorine/CYA Chart (link below) to see what your new FC range and minimum should be. Have a nice weekend.
Yes, you should adjust FC (bleach dosages) based on your current CYA. So if your CYA has dropped, take a look at the Chlorine/CYA Chart (link below) to see what your new FC range and minimum should be. Have a nice weekend.
Water looks amazing??? SWEET! Could you read the heads/tails on a coin on the bottom? If so then I would see about pushing your CYA up to 30. I would adjust your FC to your current CYA level.
Well done!
Kim
Well done!Kim
