Somehow tripped the breakers replacing an actuator. Breakers are reset, but no power to the control panel
Aqualink control panel problem
- Thread starter VolumeInvestigations
- Start date
Welcome to TFP!
One of the sparkies will be along to help you on this. You probably don't want my electrical advice.
One of the sparkies will be along to help you on this. You probably don't want my electrical advice.
I believe there is a fuse on the main control board. Open your main control box outside, remove the screws from the cover and you should see the board. The fuse is on the back. You can also check to make sure you have power to and from the transformer
