Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Mounting Turbo Cell

  1. Back To Top    #1

    Join Date
    Aug 2016
    Location
    Macon, GA
    Posts
    9

    Mounting Turbo Cell

    Can the Turbo Cell T-5 be mounted in a vertical position? If so, is the flow switch required in that position?
    Rexd, 24' X 48" vinyl round pool installed 2007, new liner installed 2012, Doheny 1.5 HP single speed pump installed 2015, Aqua Trol SWG installed 2010, Hayward 200 lb sand filter installed 2010.

  2. Back To Top    #2

    TFP Guide

    chiefwej's Avatar
    Join Date
    Jun 2011
    Location
    Tucson
    Posts
    3,109

    Re: Mounting Turbo Cell

    Yes it can be mounted vertically or horizontally. The flow switch is always required.
    chiefwej
    Tucson, AZ
    16x36 rectangular (19k) Pebble Tec play pool/spa, Pentair Intelliflo VS 011018, Super II 2hp (spa), Aqua Rite T-15 SWG, Pro Grid 60 DE, H400 & Heliocol Solar, Dolphin S-300, fill water w/high CH and TA, 50 ppm borates,TF-100 test kit, Smart Home/Alexa pool control

  3. Back To Top    #3

    Join Date
    Aug 2016
    Location
    Macon, GA
    Posts
    9

    Re: Mounting Turbo Cell

    Thanks for the info. I felt like the flow switch would be required. I only asked because I saw a diagram of it mounted without the flow switch. Never hurts to ask.
    Rexd, 24' X 48" vinyl round pool installed 2007, new liner installed 2012, Doheny 1.5 HP single speed pump installed 2015, Aqua Trol SWG installed 2010, Hayward 200 lb sand filter installed 2010.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •