Hi All,
We just started our pool construction and i'm currently investigating plumbing.
As a real newbie to pool owning and an overthinking person in real life i have a lot of questions regarding plumbing.
I have minimal space in the pool house to put all the equipment and therefor i'm looking into the best way of organizing and plumbing things.
First let me tell a bit about the pool to be build:
Dimensions 8*4*1.5m (48m3 or 12680gal)
Pump running at 16m3/hr or 4200gal/hr
Length skim to poolhouse about 5 meter.
Length poolhouse to spray is about 12 meter.
Filter max flow of 21m3/hr
We want to try pool automation with a swg and controller
I currently have the following plumbing flow/design in my head, all pvc is pool grade:
After reading a lot (on the forum) i still have a few questions:
- Would 2.0" or 2.5" inch be optimal for plumbing *in* the poolhouse considering my 2" ins and returns.
- In order to lower headloss is the use of flex tubing a good idea in the pool house?
- Considering the pool automation, what would be the best place for those sensors?
I could do everything in-line but some also suggest a bypass so you service them more easily.
Should i use a regular T (red line) or is a 45T (green line) better.
- Would those curved 90s in the design be better than two 45s?
I didn't draw them but i consider placing union/valves between:
- unions/valves on ins
- unions on outs
- unions between filter/pump
- unions between filter and rest of the equipment.
- unions/valves on start and finish of sensor bypass
So many choices and only 1 chance to do it right
Any advice would be greatly appreciated
Thanks,
Peter
We just started our pool construction and i'm currently investigating plumbing.
As a real newbie to pool owning and an overthinking person in real life i have a lot of questions regarding plumbing.
I have minimal space in the pool house to put all the equipment and therefor i'm looking into the best way of organizing and plumbing things.
First let me tell a bit about the pool to be build:
Dimensions 8*4*1.5m (48m3 or 12680gal)
Pump running at 16m3/hr or 4200gal/hr
Length skim to poolhouse about 5 meter.
Length poolhouse to spray is about 12 meter.
Filter max flow of 21m3/hr
We want to try pool automation with a swg and controller
I currently have the following plumbing flow/design in my head, all pvc is pool grade:
After reading a lot (on the forum) i still have a few questions:
- Would 2.0" or 2.5" inch be optimal for plumbing *in* the poolhouse considering my 2" ins and returns.
- In order to lower headloss is the use of flex tubing a good idea in the pool house?
- Considering the pool automation, what would be the best place for those sensors?
I could do everything in-line but some also suggest a bypass so you service them more easily.
Should i use a regular T (red line) or is a 45T (green line) better.
- Would those curved 90s in the design be better than two 45s?
I didn't draw them but i consider placing union/valves between:
- unions/valves on ins
- unions on outs
- unions between filter/pump
- unions between filter and rest of the equipment.
- unions/valves on start and finish of sensor bypass
So many choices and only 1 chance to do it right
Any advice would be greatly appreciated
Thanks,
Peter