Aqua Rite problem

[gregg4565]

I have a Hayward aqua rite system with a new T-3 cell that was replaced under warranty about 2 months ago . I've been noticing the lçd display is acting weird lately ,if I touch any of the buttons on the display the lçd starts to flicker and the numbers get distorted.
Im also having an issue with the cell setting changing by itself, I set it to T-3 and a few days later I see the salt levels are all wrong and look and sure enough the setting is on a higher cell setting then I previously set.
Could this be a bad mother board ?
Any help would be appreciated.

 

[ping]

Turn off the system and unplug the DSP board and plug it back in. Sometimes the connections go bad and this reseats the board. If that doesn't fix it make sure you have it checked out while it is under warranty.

 

[fr8erfxr]

I just had the same issue a couple of weeks ago and it was the display panel. Amazon was the cheapest.