Spa spillover schedule: pentair

[Titan7]

My friend has a pentair system, with automation, easytouch. How is this set up to schedule a spa spill over run, pool suction/spa return. They want to run this in place of the make up valve/spa bypass valve as the water only dribbles over the spill over when through the bypass.

Can this be programed or does a manual switch?

 

[rphpool]

Just set up the time and speed you want to run the spillover at. First go into setup and set speed (rpm ) for spillover, next go to schedules and set time. I hope this is what you are asking for.

 

[Titan7]

Is there a schedule named "spill over" in the Pentair schedules menu?

 

[rphpool]

Do you have the ET 4 or 8? On the 8 there is a circuit named spillover, at least on mine there was. If not you can name a circuit spillover. Not sure if there is a spare circuit on the ET4 to do it.

 

[bdavis466]

Go to circuit names> select an available feature circuit> scroll through the names to Spillway.

Go to circuit functions>scroll to Spillway> circuit function- spillway.

Settings> intelliflo> speeds> spillway> select the rpm

Schedules> spillway> set the timeframe and days to run.

 

[Titan7]

thanks!