My new chlorinator keeps shutting off and saying High Salt/Amps. I spoke to Hayward and they said the sensor can be +/- 500ppm.
I've tested with Aquachek strips and get 3620 consistently. I can reset the chlorinator and it will be fine for awhile then I recheck and it's off again. Readings are high 7's both pos and neg with around 25 volts. Sometimes it shows 3700ppm then amps go above 8 and it shuts off. Hayward says the SWG is ok and to lower salt level. TFP recommends 3600. Do you think the cell is defective?
I've tested with Aquachek strips and get 3620 consistently. I can reset the chlorinator and it will be fine for awhile then I recheck and it's off again. Readings are high 7's both pos and neg with around 25 volts. Sometimes it shows 3700ppm then amps go above 8 and it shuts off. Hayward says the SWG is ok and to lower salt level. TFP recommends 3600. Do you think the cell is defective?