Intex Adapter

[tbaranski]

Hello,

Has anyone cracked the code on how to connect a standard 1.5" pool hose directly to an Intex pump? Naturally it's non-standard (bigger) on the Intex side.

-Terry

 

[philc]

I have used these: https://www.poolsupplyunlimited.com...Kit/155089p1?gclid=CMXB3pLkmc4CFZRahgodViwMIA

 

[astrowolf67]

I followed some of the suggestions in this thread Custom PVC Pipe Adapter for Intex Pools, and used the Dura brand bushings like these Dura Reducer Bushing 1-1/2 in. to 1-1/4 in. 5 pack 437-212x5 - Pipe Fittings - Amazon.com I'm currently in the middle of my conversion, and these have worked great. The hard part to get, is the Intex hose nuts. Those are not sold sperately, at least not that I found anywhere. I ended up ordering some of the cheaper sand filter pump connection hoses direct from Intex, just for the nuts.

David

 

[rickyrich1271]

Game 4560 1.5" to 40 mm intex thread

 

[sammckin]

I found these at the local pool store,

 

[Mdragger88]

I use These

 

[Wobblerlorri]

I used these

Amazon.com : Swimline Hose 1 1 Adapter, White : Intex Pool Drain Hose Connector : Sports & Outdoors

Amazon.com : Swimline Hose 1 1 Adapter, White : Intex Pool Drain Hose Connector : Sports & Outdoors

www.amazon.com

 

[chayne]

i actually found the Intex nuts on ebay that were still on the hoses. i think i gave $12 for 3 short Intex hoses, that gave me 6 Intex nuts. i followed the directions i found on this site, and have never had a single problem.