Cleaned my hayward filter psi on low pump speed 6 high pump speed 30 psi this is 15 psi higher than normal . what are the causes ?
Have high pressure 25 psi after cleaning filter.
- Thread starter c5pacer98
- Start date
- Jan 4, 2016
- 5,288
- Pool Size
- 44000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
Welcome to TFP! Good to have you here 
It may not have backwashed completely on low pump speed.
Backwashing should be done on high speed, until the sight glass section of pipe is clear. This should be followed by a rinse, also on high speed, until water runs clear.
It may not have backwashed completely on low pump speed.
Backwashing should be done on high speed, until the sight glass section of pipe is clear. This should be followed by a rinse, also on high speed, until water runs clear.
Similar threads
