Hi I am new to the forum and owning a pool. I have been having a high alkalinity problem, but my PH is a steady 7.5, CYA is 0, hardness 340, and FC was 0 . I have added a gallon of MA to get the TA from 220 down to 170. Waited a week and now added another gallon. What should be my target TA.
High alkalinity issue
- Thread starter Skinny47
- Start date
Welcome to TFP!
If your PH is steady then there is no reason to lower your TA. Just enjoy that stable PH!
If your PH is steady then there is no reason to lower your TA. Just enjoy that stable PH!
Pooldv has given you good advice.
I know you didn't ask but 0 FC and 0 CYA is flirting with disaster in your pool. Far more important than the TA is to get some chlorine in your pool and CYA to protect the chlorine.
I know you didn't ask but 0 FC and 0 CYA is flirting with disaster in your pool. Far more important than the TA is to get some chlorine in your pool and CYA to protect the chlorine.