We have a 14,000 gallon salt water pool that is a little over a year old. We do care and maintenance ourselves. A couple of weeks ago our salt was reading higher than it actually was so we cleaned the salt cell in a very diluted acid/water bath and it seemed to be fine. Yesterday the chlorine level was reading a little low so I increased it from 85% to 90% because the salt was at 3400 where it is supposed to be. Our ph was a little high so we added the correct amount of acid. Today we got up and it looks murky, the chlorine level isn't registering on our jandy aquapure and it's saying the chlorine generating level is zero even though it's set at 90%. I did a home test on the water since no pool stores are open today and we have pretty much no chlorine and very LOW ph. We need help!!! Have ever had this happen before. Is our salt cell dead already??