COM ERROR on Pentair Easy Touch from Intellichlor SWG.

[GL72]

I don't have power to my SWG. The breaker is kicked. When I shut down the pump, reset the breaker and switch the pump back on, the breaker kicks again. Only had my new pool in service for 3-4 weeks. Any suggestions or should I call the service guys out?

 

[callahan3]

Sounds like a wiring short off hand. Leave the breaker off and inspect the wires going into the panel box and any out going to see if there is any damage. Also look inside it to see any burnt places that are signs of short. And now that i see u live in Greer SC "thats where I work" if you still have problems after a couple checks and post I could do a run by and give a hand the ol'e TFP help if need be. Just keep us posted. Also congrats on the new pool well once its up and running.

- - - Updated - - -

Also post pics and tell us what is working Thanks

 

[callahan3]

Have you gotten this fixed yet?

 

[GL72]

Yes, service tech came out and it was a bad cell, so he replaced it. I'm up and running now. I guess you'll have that time to time? Just a bad part.