Greetings everyone,
I have a Hayward SP2310x152, two speed 1.5hp pump. Probably about two years old.
Just bought the house and trying to figure everything out.
Pump is controlled on a foot pressure switch that operates like so
1 - pump on low
2 - pump on high
3 - pump on high and blower on low
4 - pump off (i think) and blower on high
I would prefer to eventually rewire it so that the blower operates independently from the pump.....
the pump runs on low just fine...on high, a loud buzzing for 1 sec and then it is shut off.
Cleaned the basket, didnt feel anything around the impeller, contacted Hayward customer support with no luck.
any suggestions?
here are my numbers, if they help
total c 5ppm
free c 5ppm
cc 0
ph 7.5
total alk 100ppm
calcium hardness 245ppm
stabalizer 75ppm
total dissolved solids 3,600 ppm
Any suggestions???
first pool ever, learning something new everyday.
meat
I have a Hayward SP2310x152, two speed 1.5hp pump. Probably about two years old.
Just bought the house and trying to figure everything out.
Pump is controlled on a foot pressure switch that operates like so
1 - pump on low
2 - pump on high
3 - pump on high and blower on low
4 - pump off (i think) and blower on high
I would prefer to eventually rewire it so that the blower operates independently from the pump.....
the pump runs on low just fine...on high, a loud buzzing for 1 sec and then it is shut off.
Cleaned the basket, didnt feel anything around the impeller, contacted Hayward customer support with no luck.
any suggestions?
here are my numbers, if they help
total c 5ppm
free c 5ppm
cc 0
ph 7.5
total alk 100ppm
calcium hardness 245ppm
stabalizer 75ppm
total dissolved solids 3,600 ppm
Any suggestions???
first pool ever, learning something new everyday.
meat