Replacing broken weir door

[evanwellens]

I've read a bunch of posts on this subject, yet following through with sources mentioned I don't see an exact match and don't know enough about weir doors to understand how exact of a match is needed , so I was hoping you guys might have some wisdom to pass along. Attached are some pictures ( I hope ;-) ) . Even the pool supply store had no answers. Thx so much in advance this forum is just the bestest and I can't imagine owning a pool without access to so much knowledge !!!

 

[Stump]

If you remove the foam is there a part#?

Also check skimmer main body for part#

 

[JVTrain]

The critical dimension is the width, so that it stays in place. The height is fine as long as it's close to the original. The closest match that will work would be Pentair Weir Assembly (516252) - INYOPools.com


Is there a part number on the underside of the skimmer, say for instance if you remove the foam, do you see a part number underneath it? If you can find that part number or the skimmer part number, call inyo pools about it and they can help you out too.

 

[Stump]

This appears to be exactly like your broken weir except for size. At inyopool.com this PART# Hayward Weir, Skimmer (spx1089k) - INYOPools.com


Maybe a call to Hayward can get your replacement.

 

[evanwellens]

Part number.. That would help.. I didn't see one (which struck me as odd ) but didn't think about under the foam. Will check when I get home. While all of these look like options , my concern was the pivot hole. Seems to me like something that needs to match. Thanks so much for all the replies!!

 

[pooldv]

The mfg info is often on the underside of the skimmer lid.