Hi, I moved into a home last August that has an above ground pool. Pool ownership is brand new to me and I'm slowly learning. I am having trouble with the chlorine levels. I have been going to the pool store for input on how to balance the chemicals, but I'm getting frustrated and would like a second opinion. The latest test, from last weekend, says the following:
FC - 0.1 ppm
TC - 0.89 ppm
CC - 0.79 ppm
pH - 7.4
TA - 98 ppm
Hardness - 197 ppm
CYA - 3 ppm
The pool was opened for the season during the first week of May. It was covered over the winter but when it was opened, there were quite a few leaves at the bottom. We have cleaned it up as well as we can. 10 gallons of shock were added over about 4 weeks, along with some calcium, algaecide, and pH plus. This was all added per what the store said each time I went in. The chlorine level has never read above 0.5 on my AquaChek test strips and is always low per the store's tester. Last weekend I went back to the store and they suggested I add 5 gallons of liquid chlorine at once at night. They also said that the hardness is low and the stabilizer is low, but not to worry about that yet. They said that the next day I should expect the test strip to turn purple, the chlorine level would decrease over a few days, and then I should test it again. Well, the following morning the test strip was white (0). In the afternoon it read 0.5, and the following day it read 0 again.
I'm going to follow up with the store again but I assume they will continue to tell me to add more chlorine and wait a few days. Just from looking around this site I think that's not the answer, but can someone more experienced than me confirm? What are your thoughts?
FC - 0.1 ppm
TC - 0.89 ppm
CC - 0.79 ppm
pH - 7.4
TA - 98 ppm
Hardness - 197 ppm
CYA - 3 ppm
The pool was opened for the season during the first week of May. It was covered over the winter but when it was opened, there were quite a few leaves at the bottom. We have cleaned it up as well as we can. 10 gallons of shock were added over about 4 weeks, along with some calcium, algaecide, and pH plus. This was all added per what the store said each time I went in. The chlorine level has never read above 0.5 on my AquaChek test strips and is always low per the store's tester. Last weekend I went back to the store and they suggested I add 5 gallons of liquid chlorine at once at night. They also said that the hardness is low and the stabilizer is low, but not to worry about that yet. They said that the next day I should expect the test strip to turn purple, the chlorine level would decrease over a few days, and then I should test it again. Well, the following morning the test strip was white (0). In the afternoon it read 0.5, and the following day it read 0 again.
I'm going to follow up with the store again but I assume they will continue to tell me to add more chlorine and wait a few days. Just from looking around this site I think that's not the answer, but can someone more experienced than me confirm? What are your thoughts?