The pool manual is mostly useless. I have 2 sets of inlets/outlets, not sure which is which. I've searched online, only find things about set up for the outside, not a picture of what it looks like on the inside. I think I have both set up with the outlet filter? Maybe it doesnt matter. Either way, feeling confused and frustrated!
Inlet/Outlet for Coleman Above ground pump
- Thread starter JMSpear
- Start date
- Jul 3, 2013
- 9,028
- Pool Size
- 15000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool SJ-40
There should be 2 the same height, those are the suction side and the other higher hole is the return from the pump and filter..
here is a post that shows how it is hooked up, the 2 connections on the right are the suction side and the 1 connection on the left is the return
Convert Intex 12 FT x 30 IN Metal Frame 1-1/4 IN Plumbing to 1-1/2 IN Plumbing
here is a post that shows how it is hooked up, the 2 connections on the right are the suction side and the 1 connection on the left is the return
Convert Intex 12 FT x 30 IN Metal Frame 1-1/4 IN Plumbing to 1-1/2 IN Plumbing
I have the outside hooked up fine, its the inlet/outlet on the INSIDE. I have 2 sets of these....
Amazon.com : Intex 1.25 in. Small Pool Strainer Connector INLET Garden
As of this very minute my father in law put the bottom/right on both A and B on the inside.
Amazon.com : Intex 1.25 in. Small Pool Strainer Connector INLET Garden
As of this very minute my father in law put the bottom/right on both A and B on the inside.