Continued from introduce yourself.

[Cdreddragon]

So.....after watching the pool dance around with all 5 of the kiddos swimming
yesterday and getting more gray hair, I called intex and asked all the questions
about setting up the pool they leave out,
like where should the seam that ties the sides to the bottom of the pool is supposed to be located.
she was a little dodgy on that answer ( half as side wall half as bottom?)
how is the liner supposed to sit in relation the the legs on the pool,
she stated the liner should touch-press against the legs from tee bar to the bottom of the legs.
Unfortunately this is not what my pool is doing ATM the bottom half of leg supports is touching the liner.

my question is what is my malfunction? Pavers to high in relation to bottom of the pool?
Or is it something I'm not aware of I'm missing?

any help is welcomed.

thank you

 

[cowboycasey]

Welcome to TFP

A picture is worth a thousand words, is there any way you can upload a pic to see what you have going on..

 

[Cdreddragon]

So here is one

- - - Updated - - -

Not done with the yard or deck but the kids don't seem to care...lol

 

[Cdreddragon]

So what do you think legs higher or lower?

 

[rdy2fly]

That's basically what mine looks like, and it has been fine


Sent from my iPhone using Tapatalk

 

[Cdreddragon]

The top rail wiggle like jello? I'd say inch inch and a half total wiggle.

 

[DarrelB]

Your good!

 

[Cdreddragon]

Here is what it look like now

 

[jmcdtucson]

It looks fine to me. Those pools are made to flex. It looks like the pavers are roughly level with the bottom of the pool?
If so you're fine.
Otherwise the only concern I might have is whether the pool is level from side to side (within 1").