- Feb 17, 2016
- 9
- Pool Size
- 13500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Truclear / Ei
Hi everyone, I just gutted our poolroom and started over. Last week we put in:
Aqualink Z4
Pentair intelliflo 2 VST
Purex Trition FNS Plus D.E. filter (existing)
Pentair mastertemp 250 propane heater
Jandy Proseries Truclear SWG
Solar for pool
My pool is an indoor gunite/plaster 13,500 gallons with attached spa and I used the Taylor k2005 kit to take some readings today. They are as follows
70 degrees
FC 3
TC 0
PH 8
TA 40ppm
CH 140ppm
CYA 0
based on my research on this website I believe where I need to be is:
FC 4-6
PH 7.5-7.8
TA 60-80
CH 350-450
CYA 20-30
Does this sound correct? Also I'm hoping to have the pool temp set to 85 in the next couple of weeks if that changes your thoughts. Any help is greatly appreciated!
Aqualink Z4
Pentair intelliflo 2 VST
Purex Trition FNS Plus D.E. filter (existing)
Pentair mastertemp 250 propane heater
Jandy Proseries Truclear SWG
Solar for pool
My pool is an indoor gunite/plaster 13,500 gallons with attached spa and I used the Taylor k2005 kit to take some readings today. They are as follows
70 degrees
FC 3
TC 0
PH 8
TA 40ppm
CH 140ppm
CYA 0
based on my research on this website I believe where I need to be is:
FC 4-6
PH 7.5-7.8
TA 60-80
CH 350-450
CYA 20-30
Does this sound correct? Also I'm hoping to have the pool temp set to 85 in the next couple of weeks if that changes your thoughts. Any help is greatly appreciated!