Planning Easytouch 8 Automation Setup - 2 actuators on one circuit?

[mgmoore7]

Noticed something else...

You have three suction inlets. That could be problematic when trying to balance the suction for the cleaner. If you are merely opening the vac valve, and expect it to have good vac by just increasing the pump speed, you may find that that wont do it. You will probably have to play with the degree of opening on each valve to get the suction needed to operate the cleaner correctly.

Yes, I agree and will just have to test some more and see how it goes. I appreciate the help.

 

[mgmoore7]

Well good news, 1st step is done. I was finally able to get 2 of the actuators setup and working when clicking on SPA. Now my RPM ramps up and the two waterfalls activate.

Tomorrow, maybe on Thursday, I will be able to get the solar thermostat setup and the actuator for it working.

For vacuum, I may just do that manually for now. One step at a time.

Once I figured out how to adjust the actuators, it was really easy.

 

[Pool Clown]

Keep us updated...