I noticed today that there are rubber thin strips that go all the way around the pool right at the top of the liner. Im guessing this helps hold it in place. Well at certain spots this strip is coming out. What is a easy way to get these to set back in? Just pushing them didnt seem to make them stay to well. Thanks.
Rubber piece at top of liner coming out
- Thread starter mrshowtime3
- Start date
What type of liner do you have beaded, over lap?
A pic would be helpful for us to advise you how to solve your issue .
Also adding your pool specs to your signature will help others who try to offer advice. Type of pool. equipment etc ...
A pic would be helpful for us to advise you how to solve your issue .
Also adding your pool specs to your signature will help others who try to offer advice. Type of pool. equipment etc ...
Its a 16x32 inground with a beaded liner. A pool store mention it might be some loc n' roll coming out. But this looks slightly different then loc n' roll does.
Then that's probably just liner lock or something similar. If you have a rubber mallet handy that's probably the easiest way to tap it back in place.