Aquarite SWG Display numbers

[dgwbusiness]

Installed a SWG yesterday. I think I know what all the diagnostic display is indicating or thought so when the installer was teaching me. I seem to remember that one of the numbers represented the free chlorine value and that I would keep it between 1 and 3, at least a 2 in the summer. However I do not know nor does the manual say which one this is? Did I hear it wrong?

 

[Uncle Flappy]

The Aquarite displays:
Pool temp
Cell Voltage
Cell Amperage
Output % (time based)
Instant Salt Level
Emulation Type
Firmware Revision
Cell Size

You'll need a test kit to measure your FC and adjust the pump run time & Output % to get the desired levels.

- Flappy

 

[dgwbusiness]

understood. Thank you !

 

[Uncle Flappy]

Glad to help. I suspect your PB recommended keeping salt levels between 2700ppm and 3400ppm (3200ppm being optimal) as per the instruction manual. If you want to read more about it, here is a link: https://www.hayward-pool.com/pdf/manuals/AquaRite-AQR-Owner.pdf