We're almost done. What's left is some plumbing at the pad. The vinyl liner is installed, water level is just below the returns. Recently put in the light niche, skimmer, and return cover plates. We have water in the returns, skimmers, and jets (deck and step) so we could pressure test it and then we just temporarily capped it off. Our concrete deck is done but we still have dirt for a yard (1/2 acre).
Looked for articles or threads about closing and chemicals needed for SWG pool. Didn't quite find what I was looking for. My question is this, do we necessarily need to put the chemicals in and run it through the pump, filter, and SWG for the winter? We're kinda at a good spot with the water level below the returns and we could blow the lines then finish the plumbing.
The status right now is the water is really dirty. We have high winds here occasionally. It's supposed to be a mild winter but it's getting down to 30 at night and 50-60 during the day.
Thanks for any help. Much appreciated!
Lee and Charissa
Looked for articles or threads about closing and chemicals needed for SWG pool. Didn't quite find what I was looking for. My question is this, do we necessarily need to put the chemicals in and run it through the pump, filter, and SWG for the winter? We're kinda at a good spot with the water level below the returns and we could blow the lines then finish the plumbing.
The status right now is the water is really dirty. We have high winds here occasionally. It's supposed to be a mild winter but it's getting down to 30 at night and 50-60 during the day.
Thanks for any help. Much appreciated!
Lee and Charissa