Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 4 of 4

Thread: Jandy Aqualink Experts!! Jandy Aqualink Firmware Upgrade

  1. Back To Top    #1

    Join Date
    May 2008
    Location
    Houston, TX
    Posts
    20

    Jandy Aqualink Experts!! Jandy Aqualink Firmware Upgrade

    I currently have an RS6 with OneTouch, Firmware K and a SpaLink. I need Firmware L to control my fancy color lights. There's a RS8 upgrade kit (part number 7092) that includes a new OneTouch (which I have), a new PCB (which I have), temperature sensors (which I have but can use as spares) and the firmware chip I need. The RS8 upgrade kit is $850 from h2opoolproducts.

    Questions:

    1. Can I get the PDA-PS6 and replace the current PCB. If I add the multiplex PCB kit (6584) can I also keep my OneTouch. Cost for pda + multiplexer is $849 + $69 = $918 totlal. That's $68 more than the upgrade only, plus I get the remote control, two spare JVAs and two spare temp sensors.
    2. Does anyone know where I can get the upgrade chip only (I only need Rev L which is ancient). I've been watching ebay and have seen plenty of PDA chip upgrades for $100-200 but no RS chips.

    I also have a used Standard Power Center w/ 4 3HP Relays so I could offset some (or most) of the cost of the upgrade by selling a near-complete rev K system.
    22k gal free form gunite w/spa, Aqualink RS-8, Jandy Aquapure SWG, 2 Jandy ColorLite, Polaris 280, Raypak 400k Low NoX Heater.

  2. Back To Top    #2

    Join Date
    May 2008
    Location
    Houston, TX
    Posts
    20

    Re: Jandy Aqualink Experts!! Jandy Aqualink Firmware Upgrade

    Sorry...I have the Four Function Spa Side Remote, not SpaLink.
    22k gal free form gunite w/spa, Aqualink RS-8, Jandy Aquapure SWG, 2 Jandy ColorLite, Polaris 280, Raypak 400k Low NoX Heater.

  3. Back To Top    #3

    Join Date
    May 2008
    Location
    Houston, TX
    Posts
    20

    Re: Jandy Aqualink Experts!! Jandy Aqualink Firmware Upgrade

    OK. I called Jandy. They actually sell a chip only upgrade for my unit which is Jandy part number 8172. The funny thing...the chip by itself is about $1700. Needless to say, I ordered the 7902 for under $800 and will replace the PCB with the new one. Now I'll have an extra nearly complete RS6 with power center. I'll post it for sale here before I put it on ebay.
    22k gal free form gunite w/spa, Aqualink RS-8, Jandy Aquapure SWG, 2 Jandy ColorLite, Polaris 280, Raypak 400k Low NoX Heater.

  4. Back To Top    #4

    Re: Jandy Aqualink Experts!! Jandy Aqualink Firmware Upgrade

    I just took out an RS8 P&S 8156 "L" if you have any interest (thats a 52 pin - PC Board also available) - in Dallas

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •