Tools used in Bayside Build

[Bigdawg]

Hi All,

When I was cleaning up my garage from the tools I used in my build I thought I would make a list to share with others so they would have an idea of what might be needed in their build. Of course not everything here is required to build an outdoor kitchen but I thought if others had a pretty good list they might be encouraged to tackle the task knowing it can be done with common tools found in most garages. I did have to buy the cement board bits for the dremel tool and the garnite drill bit.

Here is the list in no particular order.

Speed Square 6” & 12”
Right Angle Grinder with both a Metal and Cement blade
4’ Level
2’ Level
6” Torpedo Level
Vise Grips
Clamps from Sears with large opening like these http://www.sears.com/shc/s/p_10153_1260 ... ame=Clamps
Pliers
Air Rivet Gun
Drill Bits 1/8”
Cordless Drill
Sheet Metal Cutters
Circular Saw with both a Metal and Cement blade
Safety Glasses
Wood Clamps
PVC Cutter for cutting water line pipe
Pipe Wrenches for working with gas fittings
Various Screw Drivers
Miter Saw with a Metal blade
Tape Measures
Sharpies
T-Square
Wrenches for plumbing connections
Hammer
Rubber Mallet
Dremel Tool with Cement Board bit
Granite Drill bit
Stucco Trowel

Feel free to add to the list if you used additional tools in your builds.

Hope this helps.

Brad

 

[spishex]

That's very helpful, thanks! I've never worked with metal framing before and was wondering what my toolbox was missing for such a job.