Speck Badu 90/7 new bearings

[gerle77]

Out poolpump took in alot of air and i think the bearings broke cause it sounds really bad. There is no water leakage.


The problem is that I can't get the impeller off. I use a flat screwdriver in the back of the motor and then turn the impeller anticlockwise but i have to use all my strenght to get it to turn. But it will not unscrew. It feels almost like it's slipping a bit.


Am apparently doing something wrong, but what?


Poolpump: Speck Badu 90/7

 

[bobodaclown]

Here's the link to the manual: BADU 90/7 | Circulation pumps | BADU

 

[gerle77]

Here's the link to the manual: BADU 90/7 | Circulation pumps | BADU

Thanks. But there is no section on disassembly of the impeller in the manual.

Skickat från min SM-G900F via Tapatalk