Hi all,
I have a couple questions, but first some info. My PH spiked, likely as I have new plaster, so last night I put a gallon of muriatic acid in and today we're good. Here are my morning readings.
FC = 1.5
PH = 7.2
TA = 90
CH = 170
CYA = 30
The CH has been low for some time now so this morning I put 10 pounds of calcium chloride in. I am looking to add 1 gallon of liquid bleach and 1 lb of stabilizer to get the FC and CYA up a bit.
Questions:
1. Are there any restrictions or chronology to how/when you add your chemicals?
2. Assuming there are no objections to what I am adding above (haven't yet added chlorine or stabilizer), when will it be safe to swim after these chemicals are introduced?
Thanks everyone. Love this forum!
Steve
I have a couple questions, but first some info. My PH spiked, likely as I have new plaster, so last night I put a gallon of muriatic acid in and today we're good. Here are my morning readings.
FC = 1.5
PH = 7.2
TA = 90
CH = 170
CYA = 30
The CH has been low for some time now so this morning I put 10 pounds of calcium chloride in. I am looking to add 1 gallon of liquid bleach and 1 lb of stabilizer to get the FC and CYA up a bit.
Questions:
1. Are there any restrictions or chronology to how/when you add your chemicals?
2. Assuming there are no objections to what I am adding above (haven't yet added chlorine or stabilizer), when will it be safe to swim after these chemicals are introduced?
Thanks everyone. Love this forum!
Steve